Function
ZQ-04 microcomputer automatic lubricating machine, ZQ coating rail lubricating machine six point type, fixed time / ration / fixed point lubricating.
Fixed time : the smooth operation of the machine, will affect the production costs of enterprises.
In order to reduce fault and pause, must do a good job of regular maintenance.This machine is equipped with "timing device", which is controlled by a touch switch of injection seat and can be started or stopped synchronously with the conveyor belt.According to the equipment working hours , set the lubricating cycle.
Ration: each of the mechanical equipment of the friction point or surface, required amount of lubricant is different.Less lubricant will cause Insufficient lubrication, more lubricant will waste, and even cause pollution.
The machine has six lubricant outlet, each one with the single output, and with an independent lubricant volume adjustment knob.
Fixed point lubricating: The lubrication point on the conveyor belt is ball, shoot nail and link point.For each point of the lubrication gap is very small.For giving lubricant to every point, the machine except the" touch switch ", also force to fixed point lubricating .If the lubricant outlet is not close to the lubrication point, the space is too small so need force to fixed point lubricating.Therefore, this machine is equipped with a wind speed adjustment knob to adjust the pressure, in order to achieve the absolute standard of "fixed point lubricating".
Basic installation method
1.Fix the machine on the chain track, each spray point should be installed on the track corresponding to the chain sprocket bearing, then, install the proximity switch on the track vertical wheel.
2.Power on (AC 220V)
3.Connect to the Air hose(8 mm)