| Warranty: | 12months |
|---|---|
| Type: | Coating Production Line |
| Coating: | Powder Coating |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Sandblasting Machine
Various types for choice, dry sandblasting machine, wet sandblasting machine, pressure sandblasting machine, etc, choose right type from COLO
Features:
1. Can be equipped with rotary table and loading cart for simple operation and labor-saving.
2. Filter dust collector ensure clean working environment
3. Blasting abrasives can be recycled many times to reduce production cost.
4. Used to cleaning, rust-removing, stripping old coating, enhance surface adhesion before painting or powder coating.
5. Made of 3mm thick steel plate with powder-coated surface, wear-resistant and long lifespan.
| Power supply | 220V, 50HZ |
| lluminating light | 220V, 13W Energy saving light |
| Machine working size | 1200mm*1200mm*800mm |
| Turntable diameter | 800mm |
| Machine Net Weight | 320kg |
| Loaded weight of rotating station | 150kg |
| Separator motor | 220V, 50HZ, 1100W |
| Dust collect | Bags |
Powder Coating Booth
The powder booth fans draw air through filters and releases it through the top of the booth. It keeps your shop nice and clean,minimizing powder dust.
Specifications
| Model | COLO-S-1517 |
| Booth Type | Closed |
| Operator dimensions | 1500width x 1700 height x 1000 depth |
| Overall dimensions | 1640width x 2180 height x 2070 depth |
| Weight | 460kg |
| Power supply | Electric |
| Nominal power | 3kW |
| Voltage | 380V |
| Frequency | 50-60Hz |
| Filters | Polyester |
| Filters count | 2 PCS |
| Filters hang type | easy for change |
recycling fan : 1/set, 4 KW
Filter size :φ325×900 fast-loading
light: 220v 36w 2 pcs
Voltage is 380V /50HZ (could make as you want)
PLC Control Unit
COLO control unit have many programs .Different bottom correspondence different function .control the fan on/off ,adjust time range of the pulse to cleaning filters ,make the recovery powder hopper up and down . use simple , easy opeation and intelligent function.
Powder coating booth With Recovery System:
Automatic powder collecton Bin. It's work with Air pump,can be controlled by PLC control system .when press down ,can get the recovery powder .After seiving ,can reuse the powder .economic
Fan motor keep the powder stay in booth
In Booths manufactured by Colo we use aluminium fans which are safe, doesn't cause sparks when rubbing by metal elements which in case of using metal fan can cause explode.
Powder Coating Oven
This Powder coating oven used for curing the workpiece which has been spraying during the powder coating. When a thermoset powder is exposed to elevated temperature, it begins to melt, flows out, and then chemically reacts to form a higher molecular weight polymer in a network-like structure.
Features
1.One set of heat resistant fan for circulating the hot air, maintains a uniform temperature in oven
2.use great electricity tube ,take short time to heat.
3.PLC control, accurate cure timing and helps improve fuel efficiency.
4.Insulation is comprised of 100 mm thick rock wool board with galvanized inner wall and a color-steel plate cover,
5, With inner and outer trolleys to be used to carry products in and out of the oven.
Specification
| Worksize dimensions | 1600width X 1800 height X 1400 dept |
| Overall dimensions | 1900 width X 2200 height X 1700 depth |
| Power supply | Electric/ 42kw |
| Voltage/Frequency | 380V/440v(50-60hz),can be discussed |
| Warm-up time | 15-30 min. (180° C) |
| Temperature stability | < ± 3-5°C |
| Temperature max. | 250° C |
| Door Type | Two opening door |
| Inner Material: | T1.0mm galvanized plate |
| Outter material: | T0.5mm galvanized plate |
| Thickness Insulation: | 100mm |
COLO-191S Powder Coating Gun
COLO-191S is an advanced model with smart controller that is suitable for both beginners and specialists.
DVC technology makes it perfect to coat even most complex workparts with less efforts.
With three pre-setting programs, flat mode for flat shape workpiece, corner mode for complicated shape workpiece, recoating mode for respraying.
Technical Data
| Electrical Data | |
| Power Range | 220V/110V |
| Frequency | 50HZ/60HZ |
| Temperature range in use | -10 ºC+50 ºC |
| Powder Gun | |
| Gun weight | 500G |
| Rated output voltage | 24VDC |
| Input voltage | - 200kv |
| Maximum output current | 180Ua(max |
| Maximum output voltage | 0-100KV (adjustable) |
| Maximum powder injection | 600g/min |
| Polarity | negative (-) |
| Pneumatic Data | |
| Maximum input-air pressure | 10kg/cm |
| Optimum input-air pressure | 6kg/cm |
| Minimum input-air pressure | 4kg/cm |
| Maximum oil vapor content of compressed air | 1.4g/N m3 |
| Maximum compressed-air consumption | 13.2 m3/h |
Customer Visiting & Exhibition
Buying Guide
We can ship this products in 10-15 working days after payment .sea shipping to your contry .
If you are interested in this product ,pls feel free to contact us
){kind=link}